Phanpy Wearable Pump S2
Customized Material Silicone, PP, ABS, BPA free
Comes with: Shield Size 1pc of 24mm transparent silicone breast shield and 1pc of 20mm insert
Packaging box size: 180*110*155mm;
1- Main pump unit * 1 5- Silicone airbag * 1
2- Newcup * 1 6- 20mm Breast Pump Flange insert * 1
3- Tee joint connector * 1 7- 24mm Breast Shield * 1
4- Duckbill Valve * 2 8- Type-C Charging Cable * 1
1- Mode indicator 5- Mode switch key
2- Power key/Pause key 6- Suction increase key
3- Suction decrease key 7- Charging port
4- The interface displays the operation
time/ suction levels
How to use:
Step 01- Bend down slightly, make sure the nipple is in the center of the breast shield duct, so that the shield fits tightly to the breast;
Step 02- After fixing the shield in place, put on the bra, keep your body upright, and the main pump unit is facing up, then you can start pumping.
Upgraded hands-free, wireless tubeless, wearable in one second, high privacy; can achieve 120° lying and suction, enjoy a comfortable experience
Upgrade the pump valve to empty the milk more effectively, trigger multiple milk ejection, and improve the breast pumping experience: help stimulate the milk ejection rate to increase by 65%; increase the milk production per unit time by 42%; increase the comfort of breastfeeding by 50%; Increase sleep time by 60min;
The breast shield has a wide angle of 112°, the wrapping area is increased by 20%, and the large wide angle fits and wraps the breast in a larger area, which can better express the hind milk, and the amount of breast milk is doubled
Full Silicone, the whole machine can be put into the Bra, better seal and comfort for the user.
New massage mode: 40-120/min to unclog breast lumps, spa-like painless experience, intelligent massage to avoid pain.
The actual measurement is in the range of 45-50dB, which is smaller than the 1st Gen.
Sleek pouring hole design, breast milk can be poured from the pouring hole after each collection
The 1500mAh capacity lithium battery solves the troubles of breastfeeding for mothers, and can be used for about 7 cycles after being fully charged
Step 01- After pumping, take off the breast pump and keep the breast shield side up;
(Do not turn it upside down to avoid breast milk spilling)
Step 02- Remove the main pump unit, hold the Cup horizontally;
Step 03- Keep the breast shield facing up and pour the milk from the mouth of the cup into the milk storage bottle;
(Do not put it upside down to prevent breast milk from spilling)